barskrot.blogg.se - Honestech vidbox customer service

#Honestech vidbox customer service drivers
#Honestech vidbox customer service driver
#Honestech vidbox customer service Patch

in the above line, squeeze it in after 'v4l2' so that it reads 'driver=v4l2:norm=ntsc:device=/dev/vi.').I have a Gateway AMD Phenom II X4 820, quad core processor, NVIDIA Ge Force 9200 graphics, 4GB DDR3 memory.

#Honestech vidbox customer service driver

Also, you may need to add 'norm=pal' or 'norm=ntsc' to the driver options (e.g. You may have to turn up the capture level for the device to hear any sound though.

Mplayer tv:// -tv driver=v4l2:device=/dev/video0:audiorate=48000:immediatemode=0:forceaudio:alsa:adevice=hw.1:buffersize=64Īnd you should see a video and hear the audio. em28xx #0: V4L2 VBI device registered as vbi0 em28xx #0: V4L2 video device registered as video0

em28xx #0: Empia 202 AC97 audio processor detected em28xx #0: Config register raw data: 0x50 em28xx #0: Identified as Honestech Vidbox NW03 (card=83) em28xx: New device USB VIDBOX Audio 480 Mbps (eb1a:5006, interface 0, class 0) usb 2-1.3: new high speed USB device number 8 using ehci_hcd If all goes well, then kernel logs should show something similar to the following: * Limits minimum and default number of buffers */Īgain: Neither of the patches above will be needed if using the latest git clone of V4L. #define EM2884_BOARD_CINERGY_HTC_STICK 82 #define EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C 81 a/linux/drivers/media/video/em28xx/em28xx.h MODULE_DEVICE_TABLE(usb, em28xx_id_table) ĭiff -git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h a/linux/drivers/media/video/em28xx/em28xx-cards.c

#Honestech vidbox customer service Patch

The second patch added the USB Id to the driver and configures it to work with Composite and audio inputs:ĭiff -git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c * Try to identify what audio processor we have */ a/linux/drivers/media/video/em28xx/em28xx-core.c This first patch addressed the 1st issue - incorrectly identified audio chip:ĭiff -git a/linux/drivers/media/video/em28xx/em28xx-core.c b/linux/drivers/media/video/em28xx/em28xx-core.c The following two patches were against a older clone of git:///media_build.git Patching is not needed any more - this is for info only.

Once recognised, the inputs are not configured correctly.

The USB Id is not recognised by the driver.

The EMP202 is identified as a SIGMATEL chip by the driver.

There are three issues with V4L and this device:

Works with the Composite video and audio inputs.

#Honestech vidbox customer service drivers

Works with V4L drivers from git tree (the patches below have been merged).Philips SAA7113H Video Input Processor.

Based on the Empia EM2860 chip, therefore uses V4L's em28xx driver.Four pin mini-DIN socket for S-Video input.Three phono (RCA jack) inputs for Composite, which use the standard Red/White/Yellow colour scheme.